Mason Blake
Serato DJ Pro and Serato DJ Lite both offer the option to output audio through laptop speakers or a connected audio device. To use an external sound card with Serato DJ, users must first ensure that their computer's built-in sound card is set as the default output device. If a user wishes to use Serato DJ with another connected sound card or audio device, they must set their operating system to output audio through that device. Some users have reported that Serato is funky about audio connections, and recommend purchasing a high-quality external sound card.
| Characteristics | Values |
|---|---|
| Software | Serato DJ Pro, Serato DJ Lite |
| Software version | 2.4 and above (Serato DJ Pro), 1.4 and above (Serato DJ Lite) |
| Soundcard | Built-in soundcard, external soundcard |
| Soundcard cost | $30 |
| Compatible mixers | Rane 64, Pioneer DJM900 SRT |
| Compatible hardware | Turntables, CDJS, Numark MixDeck, MixDeck Express |
| Audio output | Laptop speakers, connected audio |
Explore related products
What You'll Learn
Using laptop speakers as master output
To use your laptop speakers as the master output with Serato DJ, you need to ensure that your computer's built-in sound card is set as the default output device. In most cases, this is already set correctly. However, if it is not, you will need to follow these steps:
- Set your computer's built-in sound card as the default output device.
- Open Serato DJ and go to the setup menu.
- Under the 'Audio Output' section in the Audio tab, enable 'Use Laptop Speakers'.
Note that this option is only available when compatible hardware is connected. If you are using a Serato DJ Lite version lower than 1.4 or Serato DJ Pro version lower than 2.4, you will not have the option to directly output audio through your laptop's speakers.
Additionally, if you change your operating system's sound card while the 'Use Laptop Speakers' option is enabled, Serato DJ will not recognize the changes. To apply the sound card changes, you will need to disable and then re-enable the 'Use Laptop Speakers' option.
It is also important to note that using laptop speakers as the master output may result in lower audio quality. Some users have reported that the sound quality is "horrible" when playing audio through laptop speakers. If you are looking for better audio quality, it is recommended to use external speakers or a dedicated sound card.
Fitbit Charge 2: Sound or Silence?
You may want to see also
Explore related products
Using an external soundcard as master output
To use an external sound card as the master output with Serato DJ, you must first ensure that your computer's built-in sound card is set as the default output device. In most cases, this will already be set correctly. However, if it is not, you will need to follow the steps to assign this correctly.
Note that if the operating system's sound card is changed while the 'Use Laptop Speakers' option is enabled, Serato DJ will not recognise the changes. To apply the sound card changes, ''Use Laptop Speakers' will need to be disabled and then re-enabled. Once your computer's built-in sound card is set to default, open Serato DJ and head to the setup menu. Under the 'Audio Output' section in the Audio tab, enable 'Use Laptop Speakers'.
If you are using Serato DJ Pro, you can also select an external sound card as your preferred audio output device in the 'Audio Output' section of the setup menu. This option is available when compatible hardware is connected.
For Serato DJ Lite users, when 'Use Laptop Speakers' is enabled and your computer's operating system is set to output via another connected sound card or audio device, the software will output audio via the selected device. In this case, you will need to choose the connected external sound card instead of your built-in sound card in your operating system's output settings.
Sound's Big Bang Escape: What Happened?
You may want to see also
Explore related products
Setting up Serato DJ with a PC soundcard
First, ensure that your computer's built-in soundcard is set as the default output device. In most cases, this will already be set correctly. However, if it is not, you will need to follow the steps to assign it correctly. Go to your computer's sound settings and set the built-in soundcard as the default output device.
Now, open Serato DJ. If you are using Serato DJ Pro, it should be version 2.4 or above, as earlier versions may not offer the necessary output options. Similarly, if you are using Serato DJ Lite, ensure you have version 1.4 or above.
Once Serato DJ is open, go to the setup menu. Then, navigate to the 'Audio Output' section under the 'Audio' tab. Here, you will find the option to enable 'Use Laptop Speakers'. Make sure this option is enabled.
Enabling 'Use Laptop Speakers' will route the audio output from Serato DJ through your computer's built-in soundcard. If you wish to output audio through another connected soundcard or audio device, you can set this in your operating system's output settings. However, you may need to disable and then re-enable the 'Use Laptop Speakers' option for Serato DJ to recognise these changes.
Please note that these instructions are based on the assumption that you are using a Windows PC. If you are using a Mac, the steps may differ slightly. Additionally, ensure that you have compatible hardware connected, as the 'Use Laptop Speakers' option may not be available otherwise.
How Sound Absorbing Paint Quiets Noisy Doors
You may want to see also
Explore related products
Using Serato DJ with a Mac
Serato DJ Pro and Serato DJ Lite are both compatible with Mac. To use Serato DJ with a Mac, you will need to meet the following system requirements:
- MacOS 14 Sonoma or newer
- 16GB RAM (for optimal performance)
- A processor with AVX support
Note that Serato DJ Pro and Serato DJ Lite do not support 32-bit operating systems.
If you want to use your Mac's built-in speakers or an external sound card as the master output for Serato DJ, you must first ensure that your computer's built-in sound card is set as the default output device. Once this is done, open Serato DJ and go to the setup menu. Under the 'Audio Output' section, enable the ''Use Laptop Speakers' option.
If you want to use an external sound card as your output device, you will need to set your operating system to output audio through this device. Then, open Serato DJ and enable the 'Use Laptop Speakers' option. The audio will then be routed through your selected output device.
Motherboard Sound Cards: Integrated or External?
You may want to see also
Explore related products
Soundcard alternatives
Serato DJ Pro and Serato DJ Lite both offer the option to output audio through your laptop's built-in soundcard or speakers. To enable this feature, you must first ensure that your computer's built-in soundcard is set as the default output device. Once this is done, open Serato DJ and head to the setup menu. Under the 'Audio Output' section, enable 'Use Laptop Speakers'.
If you would like to use an external soundcard or audio device as the master output with Serato DJ Pro, you can do so by setting your operating system to output audio through the desired device. However, it is important to note that Serato DJ will only recognize these changes if the 'Use Laptop Speakers' option is disabled and then re-enabled.
There are also alternative hardware options for using Serato DJ with a soundcard. For example, you can use a mixer with an internal sound card, such as the Rane 61, 62, 64, or 68, or the Pioneer DJM900 SRT. These mixers do not require a separate Serato box. If you are using a different mixer, you may need to purchase a controller or a used SL2 box to connect to Serato DJ.
Additionally, when using certain Rane hardware, you will have the option to assign decks to the PGM channels. You can also select the CUSTOM option in the Deck Setup to create your own configuration using the device driver setup window.
The Sonic Boom: Breaking Sound Barrier Explained
You may want to see also
Frequently asked questions
You must ensure your computer's built-in sound card is set as the default output device. Once this is done, open Serato DJ and head to the setup menu. Under the 'Audio Output' section, enable 'Use Laptop Speakers'.
The Rane 64 and the Pioneer DJM900 SRT are compatible with Serato DJ. The Behringer UCA202 Audio Interface is another sound card that can be used with Serato DJ.
Yes, but only if you haven't plugged in any hardware. If you are using a Mac, you can do this by creating a multi-output sound device in the MIDI setup in the Utilities folder.
